+8613838096145
info@becens.com
HOME > APPLICATION
Alumina Oxide and Silicon Carbide are Widely used in the manufacture of bounded and coated abrasive products such as cuttings discs, grinding wheels, drill points and abrasive papers.
Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to a smooth or rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants. A pressurized fluid, typically air, or a centrifugal wheel is used to propel the blasting material.
Industrial minerals that can withstand extremely high temperatures and abrasion are used in the construction of furnaces, kilns, incinerators and reactors, in the production of refractory bricks and castables used to produce glass and cement, and in the production of steel, iron and other metal products.
Polishing is a process by which material is
precisely removed from a workplace to produce a desired dimension, surface
finish, or shape.
There is a wide selection of abrasives to choose
from when selecting a lapping and polishing process. Selecting an abrasive is
dependent upon the specimen hardness, desired surface finish, desired removal
rate, lifetime, and price.
A water-jet utilizes a high pressure stream of water to erode a narrow line in the stock material. To cut a wider range of materials from tool steel to titanium to foam, a granular (typically garnet) abrasive is added to the water-jet, increasing the cutting power. Because the abrasive is added at the nozzle, it is simple to switch between water only and abrasive water-jet cutting.
Anti-skid surfaces are commonly made by bonding duratred products(Brwon Alumina Oxide, Black Silicon Carbide, Calcined Bauxite, Tabular Alumina and etc) to a base such as steel, aluminum, granite, concrete, etc. in order to make a slip resistant surface. They can be used in any heavily trafficked area that must provide traction or stand up to heavy wear, environmental stresses, weathering and slip resistance.